Followers

Saturday, July 16, 2011

Fix the YLOD with a Heat Gun Reflow

In the previous tutorial I showed you the process of taking apart a fat (phat?) PlayStation 3. This time I'll show you how to fix the Yellow Light of Death! Like I said in my previous post, the YLOD is very, very similar to the Xbox 360's Red Ring of Death (RROD). It's also fixed the exact same way!



Once you have the PS3 taken apart, you should clean off all thermal compound on the CPU, GPU, and heat sink. I use 70% Isopropyl (rubbing alcohol) and it works great! If it's really tough to remove, try some Goo Gone and follow it up with some rubbing alcohol.




So now your board is ready to be reflow. But wait! You don't want to apply to much heat to components that do not need to be reflowed. To prevent this, we will make a shield to protect everything except the desired components. What I like to do is cut a piece of bubble wrap the size of the entire board, trace the outline of what I want to reflow (in this case, the CPU and GPU), and cut it out.

Then get a piece of foil slightly larger than your bubble wrap and cut out the same design. Do this 2 times so you can completely surround the bubble wrap! This will create a pocket of air in between the pieces of foil so little heat will get through! This is also reusable... just in case you need to do another reflow in the future!



Place a small baking cooling rack on top of your griddle so your PS3 won't touch the board. You'll notice 2 large prongs that prevent the PlayStation 3 from laying flat on the griddle - the cooling wrap will allow them to either stick through the holes or off the side so the PS3 will lay flat!

Make sure it's flat!

turn your griddle to about 300 to 350 degrees Fahrenheit and let it heat for about 5 minutes or until the light goes off (indicating that it reached the desired temperature). Grab your heat gun and turn it on to the lowest setting. The lowest setting mine has is 450 degrees Celsius.


Move the heat gun at all times! Make small circles around each chip - about 15 seconds per chip - then move onto the next one. Do this for about 5 minutes. Turn off your griddle and heat gun and wait at least 40 minutes before touching your board. Any bump or nudge to the board can totally ruin your PS3 here, so LEAVE IT ALONE!

After at least 40 minutes have passed, check to make sure the PS3 is cool to the touch by touching something other than the CPU or GPU - just in case. Remove the foil shield and reapply thermal compound to both chips. A pea sized blob will do it for each chip.


Reassemble your console by following my disassembly tutorial backwards and enjoy your revived PlayStation 3!






Until next time...

30 comments:

  1. thanks for sharing, great guide :)

    ReplyDelete
  2. My mates PS3 did this just the other day, i'll link him this.
    Thanks heaps +follow

    ReplyDelete
  3. Good stuff, just took mine to the shop the other day, should have persevered and done it myself.

    ReplyDelete
  4. Jesus Christ, you must be some kind of tech god. I don't even know how to take off the PS3 cover, not that I would want to do that to my PS3 since there's nothing wrong with it but you get the point. D:

    ReplyDelete
  5. great guide thank you so much my ps3 works now again

    ReplyDelete
  6. nice post man, hope I never need to do this but if i do, I now know what to do !

    ReplyDelete
  7. Nice job man! I'll inform some friends of mine ;)

    +follow :)

    ReplyDelete
  8. wow great info blog.. This will definately come in handy. followd

    ReplyDelete
  9. hmmm, very useful. thanks for this informative post.
    +followed

    ReplyDelete
  10. this is great info! thanks for helping people out with tutorials like these.

    ReplyDelete
  11. If you get the slim one it wont get these problems

    ReplyDelete
  12. I hope that nothing like this will ever happen to my Playstation, but if anything happens your tutorial will be useful for sure.

    ReplyDelete
  13. next time someone brings me a broken ps3 I'll come here so i know what to do to fix it

    ReplyDelete
  14. without you there would only be... youtube... i hate youtube tutorials... HATE, THANKS for these man it really helps

    ReplyDelete
  15. This is why i only play on xbox, but mostly on my PC of course! Video games beast.
    +followed

    ReplyDelete
  16. diggin it. at least i have something to fall back on in case my ps3 goes to the dumps. following

    ReplyDelete
  17. I'll give this to my friend! his ps3 broke last week lol.

    ReplyDelete
  18. Wow, impressive wirk you did there. I couln't do it.

    ReplyDelete
  19. really helpfull! got a ps3 myself with the problem

    ReplyDelete
  20. Ahh, the Yellow Light of Death! Its funny, because my friend mentioned that his PS3 wasn't working, I'll forward him this post incanse its the YLOD

    ReplyDelete
  21. Very nice tutorial, I've had a few problems with the yellow light of death in the past, thanks for the help!

    ReplyDelete
  22. this look dangerous for me but i'll give a try, thanks!

    ReplyDelete
  23. Dude, awesome tutorial. I will definitely use this if I ever come across a cheap YLOD PS3.

    ReplyDelete
  24. great tutorial , i had 3 ps3 with this problem (ylod) and i put them in the garbage but now i know how to fix thanks

    ReplyDelete
  25. what does the heat gun do? why u gotta reflow the cpu and gpu?

    ReplyDelete
  26. what does the heat gun do? why u gotta reflow the cpu and gpu?

    ReplyDelete
  27. what does the heat gun do? why u gotta reflow the cpu and gpu?

    ReplyDelete